High-strength steels STRENX

High-strength steel STRENX, produced by the Swedish concern SSAB, allows you to increase productivity in various areas. Using STRENX you get the following advantages for your designs and production:

If your projects require new and more sophisticated production methods, our technical support service will provide assistance and provide the necessary recommendations on the selection of materials, their processing and application features.

Any welding method can be used for STRENX steel. Semi-automatic welding is the most widely used today. This type of welding is easy to automate to increase productivity. Manual electric arc welding, argon arc welding, plasma welding, welding under a flux layer and laser welding are also used.

Thermal cutting of STRENX hot-rolled steel sheets is performed with gas, plasma and laser The high-quality surface of STRENX sheet and coil products does not require additional preparation before laser cutting.

Free bending and rolling of STRENX sheet and coil products is performed using standard bending equipment. Homogeneity of properties, small tolerances in thickness and high quality of the surface make it possible to calculate the bending process with high accuracy.

Processing STRENX steel usually does not require any special equipment. When drilling, countersinking, threading, turning and milling, it is recommended to use machines equipped with high-speed steel and carbide tools.

High-strength structural steel with a yield strength of 650-700 MPa.

The minimum yield strength of STRENX 700 structural steel is 650-700 MPa, depending on the thickness.

STRENX 700 steel meets the requirements of the EN 10 025-6 standard regarding the S690 grade, as well as the product thickness range. Typical areas of application include load-bearing structures that have special requirements.

Steel STRENX 700 E (which meets the requirements of the standard S 690 QL) is produced in sheets with a thickness of 4 to 160 mm, and steel STRENX 700 F (which meets the requirements of the standard S 690 QL1 ) — in sheets with a thickness of 4 to 130 mm.

Here are just some of the advantages of this steel:

STRENX 700 E steel is produced in sheets from 4 to 160 mm thick, and STRENX 700 F steel in sheets from 4 to 130 mm thick. The width of the sheets is up to 3350 mm and the length is up to 14,630 mm, depending on the thickness. More information on request.

High-strength structural steel with a yield strength of 900 MPa.

The minimum yield strength of STRENX 900 structural steel reaches 900 MPa, depending on the thickness.

High-strength steel STRENX 900 uniquely combines strength and toughness with high machinability. Typical areas of application include lightweight load-bearing structures of construction machinery, road vehicles, and cranes.

STRENX 900 steel meets the requirements of the EN 10 025-6 standard regarding the S890 grade, as well as the range of product thicknesses. STRENX 900E steel (compliant with S 890 QL) is available in sheets from 4 to 100 mm thick, and STRENX 900F steel (compliant with S 890 QL1) in sheets up to 80 mm thick.

Here are just some of the advantages of this steel:

STRENX 900E steel is produced in sheets with a thickness of 4 to 100 mm, and STRENX 900 F steel – in sheets with a thickness of up to 80 mm. Steel products of both brands are available in widths of up to 3350 mm and lengths of up to 14,630 mm, depending on the thickness.